Gear Pump

उत्पाद विवरण

A gear pump is a type of positive displacement pump that uses meshing gears to pump fluid. It consists of two gears, typically of equal size, rotating in opposite directions within a pump casing. As the gears mesh, they create chambers that increase and decrease in volume, which results in the displacement of fluid from the inlet to the outlet of the pump.

Gear pumps are commonly used in various applications such as lubrication systems, hydraulic power units, and chemical processing. They are known for their simple design, compact size, and ability to handle high pressures and viscous fluids. However, they are not well-suited for pumping fluids containing abrasive particles, as these particles can damage the gear teeth and cause premature failure of the pump. 

Application:-

• MALHAR Rotary gear pumps are useful for handling following Viscous and semi Viscous liquid.
• Clean lube oil, Castor oil, Coconut oil, Groundnut oil, Cotton seed oil and Hydraulic oil.
• All kind of vegetable oils.
• Paints and Varnish , Viscous Chemical , Printing Ink.
• All Kind of fish and animal oils.
• Soap Solutions , Glycerin , Glycol and Glue
• Sugar molasses and syrups. Rotary gear pumps are Widely used in paper mills, refineries, Steel mills and textile Industries.

• All Positive displacement rotary gear pumps are self priming pumps with suction lift of 5 meters at mean viscosity and speed 1440 rpm
• The SEG series of MALHAR pump has modified profile of teeth to give accurate discharge within the pressure range .
• The helical gear design delivers constant volume without and pulsation. It also reduces internal slippage and gives high volumetric efficiency.
• Compact in size and highly economical
• All these are self lubricated pumps recommended for use where the liquid to be transferred has lubrication properties Hence the bearing are lubricated by the pumping fluid and do not need any external lubrication.
• Easy maintenance due to availability and interchangeability of spares.
• All MALHAR gear pumps are designed and assembled and  with close tolerances to reduce the mechanical losses, thus it consumes less power and operates at higher efficiency.